LT1MAN

iTrader: (6)

whats different on about the 2002 ls1 camaro intake manifold than the earlier years, someone told me something about it being an ls6 intake or ls2 maybe? are the intakes the same on all the ls1 f-bodies? what about heads and cam, are they the same throughout?
thanks
aaron

smg267

iTrader: (23)

I'll take a shot at it for you... The 01-02 F-body's have the LS6 intake and do not have the EGR tube that goes through the front of the manifold. The cam was changed on the 01-02 for emissions reasons to get rid of the tube I know the heads are diffrent too. from what I've read on the forums the 98 heads suck. I am sure someone will add more or correct me.

Luna

iTrader: (6)

Theres alot of differences between 98 and 02, different heads, different intake manifold, different cams. Check the stickies for all the specifics.

But yea, the 02's had an LS6 intake, whereas the 98-00s had just the LS1 intake.

Ima get mines

iTrader: (3)

I have 98 heads on my 99 T/A. Do 98 heads realy suck?

Ace$nyper

iTrader: (8)

I wouldn't say they suck compared to most heads but for the lsX world yes they are an underdog.

LT1MAN

iTrader: (6)

thanks for clearing that up for me, i appreciate the knowledge!

jmm98LS1

iTrader: (28)

In stock form, there's not a considerable performance difference between the different LS1 castings with a very small advantage going to the 241's. They're all pretty much equal once ported.

blackfang

iTrader: (2)

I am glad I have a 25k 00 motor then

Shallow Bay

iTrader: (3)

https://ls1tech.com/forums/showpost....80&postcount=2