TSP true duals w/ Spirals installed, pics and vid.
02-18-2007, 06:47 PM
#1
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Nov 2004
Location: Nashville, TN
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
TSP true duals w/ Spirals installed, pics and vid. Just wanted to post a thumbs up for Texas Speed. After a bit of a wait, I got my duals in and stayed late one night at work for the install. I created a Cardomain to host some installed pics and then took a quick video today. Sorry for the one man video/driving crew, the wife didn't want to play along.
Click the link in my sig for the video and here's the link to the site.
BTW, I picked up a ton of ground clearance over my old ill-fitted Y pipe. You can see in the video at the end when I drive by just how tucked up it sits. Lowest point is the turndowns and I plan on going back and angling them out a little bit. Drone is not bad, vibration is a bit more than I planned for. Still can't wipe the smile off of my face while driving now though.
http://www.cardomain.com/ride/2573591
Click the link in my sig for the video and here's the link to the site.
BTW, I picked up a ton of ground clearance over my old ill-fitted Y pipe. You can see in the video at the end when I drive by just how tucked up it sits. Lowest point is the turndowns and I plan on going back and angling them out a little bit. Drone is not bad, vibration is a bit more than I planned for. Still can't wipe the smile off of my face while driving now though.
http://www.cardomain.com/ride/2573591
Last edited by 01SSRMS; 02-18-2007 at 07:59 PM.
02-18-2007, 08:39 PM
#7
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Nov 2004
Location: Nashville, TN
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Cold start there is quite a bit of rattle/vibration, mainly in the hatch area. Probably should be expected with 97k on the clock. After about 15 seconds, it straightens out and gets alot better. Interior drone is ok up until about 1700 rpms, then it gets pretty quiet up until 2200 rpm and after that, gets pretty rowdy.
Trending Topics
02-19-2007, 12:12 AM
#10
12 Second Club
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sidewayz28
mines coming on tuesday! i was hoping you were cammed. ill get a video of mine up next week
Haha, I think I have now posted my cars video in EVERY single thread that has to do with TSP TD's with spiral flows
The best sounding exhaust out there IMO. 
02-20-2007, 12:00 AM
#13
12 Second Club
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the comments on the car guys
Once my car is tuned I would imagine it's not going to be as choppy of an idle, has your car been tuned because it sounds like it has or the idle is way high for some reason it should be a bit choppier than that, I mean does 1 degree of LSA make that big of a difference in idle quality??? Either that or my cam is on a 112 (the person I bought it from said it was a 113 but it didn't have a cam card to verify and he was the second owner and got in on trade from someone)
Originally Posted by white_camaro
wish i would have gotten my tsp 233/239 on a 113, your car sounds badass blueb4c
02-20-2007, 12:52 AM
#16
12 Second Club
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sidewayz28
lol, and dude those peices of wood were kinda scary!!!!!
Haha, yeah actually a result of having the TD's and a driveway at a friggin 86 degree angle from the garage
