Wades SnS

iTrader: (2)

I was wondering what is available for the carb intakes in the tb department. I have searched and cant seem to find what my options are. has anyone tried more than one? If so what are the advantages or disadvantages of one over another? Also is it possible to have a tb that flows too much? Some claim 2000cfm. If I dont need that much at this point in time(I'm sure I don't) will it affect the running and tuning of my engine? Also how hard is this setup to tune?

Thanks,
..RJ..

Jimmy P

iTrader: (177)

I have a Nick Williams tb on my GMPP carb manifold. Bolted right up.

Phoenix 5.7

iTrader: (7)

are u talkin about a TB that goes on an elbow(like a 90mm), or a TB that goes where a carb would?

8ty8 LS1

iTrader: (3)

i believe he's talkin about the elbow..i was going to do the same on my truck

Wades SnS

iTrader: (2)

I was talking about the one that bolts directly to the intake like a carb. I would need one with a tps and iac

Jimmy P

iTrader: (177)

intakeelbows.com

If you purchase the Edelbrock or the GMPP carb, you have to buy one of these elbows, and then you attach the TB to the elbow.

Steve Burger

iTrader: (33)

YOu can also get a 4150 type 4bbl TB from a number of manufacturers that will work.