confused, cylinder #2 and # not firing but no cel
03-20-2008, 09:47 PM
#1
On The Tree
Thread Starter
iTrader: (42)
Join Date: Oct 2006
Location: ruston, la
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
confused, cylinder #2 and # not firing but no cel about two weeks ago i did a ported fast 90, 42lb injectors, e-waterpump and underdrive pulley in stall on my 2000 ss car it is a stock bottom end h/c car sent my pcm to my tuner got it fixed up when i started the car ran great drove it that not ran real strong i was happy so that weekend i jump in to get ready to go to the track and starts missing so i drove it ran like **** so the next week i change plugs all the ones on the pass side black, drivers side looked ok, so i change them take it to the track and first pass on motor 12.80 felt like **** again so i said **** it its going to run or blow so i turned the bottle on 150 shot and ran 1089 spinning so happy again ran good the rest of the day, tonight jump in have not started sence i got back from the track runs like **** and wont clean up cel has never came on and i can grab #2 header and #8 also so whats up any ideas?? o and the first time this happened a got a tech2 from work all it had was a stored code for evap leak
