Cam Selection for Street
09-29-2009, 03:54 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Location: Greenwood, IN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Cam Selection for Street I thought I was dead set on the ASA cam for my build, but the more I read, the more I think about others.
The car is a 1969 Camaro that will be street driven, autocrossed, and tracked. I want it to have decent street manners, but I want a little lope to the idle to give it some old school feel. I am not looking to break a certain HP target, but I would like a nice flat torque curve.
Key Engine Components:
Anything else you need to know to help me decide?
Thanks,
Matt
The car is a 1969 Camaro that will be street driven, autocrossed, and tracked. I want it to have decent street manners, but I want a little lope to the idle to give it some old school feel. I am not looking to break a certain HP target, but I would like a nice flat torque curve.
Key Engine Components:
- LQ4 6.0L
- 799 Heads
- Static Compression comes in around 10:1
- LS2 Manifold and Injectors
- LS6 Valve Springs (these can be replaced if needed, they were purchased to go with the ASA)
- Long Tube Headers
- T-56 Trans
- 3.73 Gears
Anything else you need to know to help me decide?
Thanks,
Matt
Last edited by Buttz1969; 09-29-2009 at 03:56 PM. Reason: More info
