Am I going to have to fly cut with my set-up?
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Canton/Dover, Ohio
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Am I going to have to fly cut with my set-up?
Hey everyone im new to the whole heads thing so if anyone dont mind helping that would be great.
Running a 232/236 586/587 114lsa Cam.
Just picked up a set of TrickFlow 220's off an LS2.
http://www.trickflow.com/egnsearch.a...=KeywordSearch
I took the CC down from 65CC to 59CC. Going to be running a LS2 head gasket. Going to run 1.7 Harlan Sharp rockers as well. Will I end up needing to fly cut?
Running a 232/236 586/587 114lsa Cam.
Just picked up a set of TrickFlow 220's off an LS2.
http://www.trickflow.com/egnsearch.a...=KeywordSearch
I took the CC down from 65CC to 59CC. Going to be running a LS2 head gasket. Going to run 1.7 Harlan Sharp rockers as well. Will I end up needing to fly cut?
Last edited by CGriff04; 06-18-2010 at 02:58 PM.