valve questions
#1
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Hillsboro Kansas
Posts: 1,823
Likes: 0
Received 0 Likes
on
0 Posts
valve questions
Trying to get a rough estimate on ptv clearance I put a stock ls3 head on my block with no gasket. My ptv clearance is good... But my heads will be milled .030 with a .051 head gasket. I should be good there right? Also looking at the rocker arm contact on the valve stem tip, its on the inside shoulder, how do I get it centered on the valve stem?