ready for a cam need ideas
#1
On The Tree
Thread Starter
Join Date: Aug 2010
Location: vicksburg ms
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
ready for a cam need ideas
looking for a cam i want it to sound badass make around 400 at the wheels i dont want to spin the motor much over 6 grand and be decent on my valvetrain my car is driven mostly on weekends ill take it to the track too i was looking at a tr230 ms3 or 4 torquer v3 asa with 1.8 rockers and a few more what can yall gurus come up with for me.
#2
looking for a cam i want it to sound badass make around 400 at the wheels i dont want to spin the motor much over 6 grand and be decent on my valvetrain my car is driven mostly on weekends ill take it to the track too i was looking at a tr230 ms3 or 4 torquer v3 asa with 1.8 rockers and a few more what can yall gurus come up with for me.
#4
TECH Senior Member
iTrader: (35)
IMO, stick with 1.7 rockers.
You won't have to spin these very far past 6k to max power.
Just order a custom cam from TSP. Specs are: 228(.588")/232(.595") w/XER lobes, 110 LSA an 108 ICL (10* V overlap). Now if that's to much overlap for you then get it with a 111 LSA an 108 ICL (8* V overlap). Either one will sound bad *** and make good power.
For valve springs, PAC 1518 beehives, an new valve seals.
You won't have to spin these very far past 6k to max power.
Just order a custom cam from TSP. Specs are: 228(.588")/232(.595") w/XER lobes, 110 LSA an 108 ICL (10* V overlap). Now if that's to much overlap for you then get it with a 111 LSA an 108 ICL (8* V overlap). Either one will sound bad *** and make good power.
For valve springs, PAC 1518 beehives, an new valve seals.
Trending Topics
#9
Staging Lane
Join Date: May 2012
Location: Fairfield,CA
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Give geoff at EPS a call. Tell him what your goals are and he will set you up. I called him just to ask questions about order a cam kit and he spent about half an hour going over some options. Ended up ordering and I am happy so far but we will see what kind of numbers I make on thursday when i get my dyno tune
#10
On The Tree
iTrader: (8)
Join Date: Oct 2010
Location: Houston,Tx
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Exactlly you need to call someone who actually specs out cams or PM Patg i hate these "spec my cam threads" yeah people know there **** on here but not everybody like i said call patg eps etc let them know what you want they will steer you in the right direction
#11
Follow the link below to get Allan here at Futral Motorsports to spec a cam for you.
http://www.futralmotorsports.com/customcamworksheet.asp
http://www.futralmotorsports.com/customcamworksheet.asp
#12
TECH Senior Member