Weak motor after overev
#1
Teching In
Thread Starter
Join Date: May 2012
Location: mcdonough, georgia
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Weak motor after overev
A friend of mine was driving my car and accidentally went to 2 gear instead of 4th. The car started bogging and threw the random/misfire code. First thing i did was replace spark plugs. Then replaced ignition wires. Today i replaced the pushrods. After getting in and looking all 4 of the pushrods for intake valves on driver side were bent. BAD. none on the passenger side were. i drove the car after that and now it runs much better than it was. however it still feels much slower than before the overev. and the service engine soon light will flash and then just stay on and then flash and repeats this. Please someone help me.
Trending Topics
#10
Teching In
Thread Starter
Join Date: May 2012
Location: mcdonough, georgia
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
and yes lol it wasnt me my buddy did it hes used to driving a 5 speed honda hes got built up so id imagine it may have been a little wierd for him but whatever you live and you learn
#15
TECH Enthusiast
iTrader: (13)
Join Date: Nov 2005
Location: Pittsburgh PA
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
yeah an overrev with bent push rods sounds like it floated valves for sure and intake valve may have kissed pistons and bent the pushrods. Valves could be bent and also the valve springs could be shot.... they could have been severly stressed and lost alot of their properties. Could have valve float much sooner in the rpm range now and thus the car feels sluggish.
#16
TECH Junkie
iTrader: (11)
if i were you to be completely honest, sell the heads for like 80 for the pair, and pick up some 243s for 400 bucks give or take.......your goona be almost halfway there after replacing just the springs let alone some valves that will need attention.....and your ripping the heads off anyway......mine as well get some extra horses to compensate with the stress of tearing a motor down