90lx 6.0
#1
90lx 6.0
im getting a iron block 6.0 going turbo are the stock heads good for boost? And what cam should i use to get a little more power from the motor, motor is stock with 60-80 thousand miles, Its going in a 90 hatchback, also gotta make a fuel system should it be a fuel cell or stock tank, any information is greatly thankful thanks alot guys please dont bash new here
#2
FormerVendor
iTrader: (3)
Stock heads will be fine for anything up to and around 800-900rwhp if head studs and good gaskets along with proper gasket prep are used.
I would use the stock tank with a dual Walboro 255 in-tank set-up and a good regulator. Lonnies has a good set-up in kit form for what you're looking for. Nasty Performance also is another good one that does anything you want and builds it for you and ships it to your door. Both of these are site sponsors and are great companies to use.
No need to re-invent the wheel.
I would use the stock tank with a dual Walboro 255 in-tank set-up and a good regulator. Lonnies has a good set-up in kit form for what you're looking for. Nasty Performance also is another good one that does anything you want and builds it for you and ships it to your door. Both of these are site sponsors and are great companies to use.
No need to re-invent the wheel.
#4
FormerVendor
iTrader: (3)
https://www.nastyperformance.com/
Lonnies Performance
http://www.lonniesperformance.com/fuelsystems.htm
I guarantee if you call either one they will put something together for you that you need.
Yes you should stud the heads IMO.