lunati cam?
#3
10 Second Club
iTrader: (12)
Mmmmm.... I disagree about their cams not being "up to par". My little itty bitty Lunati T1 made 415/405 w/the "normal" bolt on's and good heads(TEA) in my old set up..... did I mention that was through a 12 bolt/4.10/slicked rear? ... or did I mention that it was making 400 lbs ft TQ. @ 4k rpm's?
Nuthin' wrong w/Lunati. It's STILL about the COMBO.....(a good tune don't hurt either).
Nuthin' wrong w/Lunati. It's STILL about the COMBO.....(a good tune don't hurt either).
#4
LS1TECH & Trucks Sponsor
iTrader: (34)
Originally Posted by 2001CamaroGuy
I don't think their cams will make as much HP as a company that specializes in LS1s (ex: LG, TR, MTI, etc....) just because that’s not their main focus.
-Matt-
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#6
TECH Senior Member
Just be sure the ramp rates are comparable. Look at the duration and different lifts...not just at .050.
Lunati can custom grind you just about anything you want.
Lunati can custom grind you just about anything you want.
Trending Topics
#9
SN95 Director
iTrader: (16)
Originally Posted by LowETz
Mmmmm.... I disagree about their cams not being "up to par". My little itty bitty Lunati T1 made 415/405 w/the "normal" bolt on's and good heads(TEA) in my old set up..... did I mention that was through a 12 bolt/4.10/slicked rear? ... or did I mention that it was making 400 lbs ft TQ. @ 4k rpm's?
Nuthin' wrong w/Lunati. It's STILL about the COMBO.....(a good tune don't hurt either).
Nuthin' wrong w/Lunati. It's STILL about the COMBO.....(a good tune don't hurt either).