Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

backpressure at start up

Thread Tools
 
Search this Thread
 
Old 07-19-2004, 09:01 PM
  #1  
Staging Lane
Thread Starter
iTrader: (1)
 
transamws6r's Avatar
 
Join Date: Mar 2004
Location: Shelby Twp., Michigan
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
Default backpressure at start up

I recently put a cam in my car and had it tuned for the cam and not for the nitrous(130 wet shot), Im throwing the car back on the dyno in a week and I was wondering what some of you thought about this. Whenever I first start up the car and let it sit for a minute then when drive normal for a minute and hit the gas heavily the car will have a lot of back pressure and pop quite a bit and under full accel. the car puts out a lot of black smoke like its running rich and have never been tuned, my boss at the shop said I need to beat on the car for a whole day cuz there is a lot of carbon in the fuel system/injectors. I tried putting in some fuel injector cleaner and that had no effect. Do you think I should put some new injectors on the car or clean em out before I do the tuning on the dyno or is it just normal with the cam dumping the fuel? thanks 4 your help




All times are GMT -5. The time now is 09:30 PM.