How long to ....
#1
How long to ....
Do a cam swap/valve spring swap? Ls1how to says 3-12 hours. I'm thinking it will take me about 3 times that long. Any experiences? Trying to decide if I should give a go or not. If it was a pushrod mustang I wouldn't be intimidated. The thing that concerns me the most is the valve springs. That seems like the hard part.
#2
Launching!
Join Date: Jun 2004
Location: Belle Vernon, PA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
You need a tool for the springs and a couple dowel rods for the lifters. If you know what you are doing, I would say 6 to 8 hours should be about right. Maybe quicker for experts.
#3
11 Second Club
I just did this not but two weeks ago. This post
https://ls1tech.com/forums/generation-iii-internal-engine/255574-just-installed-cam-springs-tips-hints-info-inside-promised-post.html
has most of what I would recommend.
https://ls1tech.com/forums/generation-iii-internal-engine/255574-just-installed-cam-springs-tips-hints-info-inside-promised-post.html
has most of what I would recommend.
#4
Launching!
Join Date: Jun 2004
Location: Belle Vernon, PA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blkZ28spt
I just did this not but two weeks ago. This post
https://ls1tech.com/forums/showthread.php?t=255574
has most of what I would recommend.
https://ls1tech.com/forums/showthread.php?t=255574
has most of what I would recommend.