Heads and Cam are in
02-21-2005, 06:37 PM
#1
9 Second Club
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: Long Island,NY
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Heads and Cam are in I had Eastside do the install great shop,I went with there 5.3 heads pp,Stayed with my TR224 112lsa.I did not get a flow sheet but Ken said they flow around 300 cfm.My other suppoting mods are kooks headers with catted y,gmmg exhausht,lid and smotth bellow the rear is a moser 12 bolt with 410's out back.The car made 432 rwhp at 6700rpm's torque 400 at 4500 rpm's.I just love driving this car so much more now it runs real strong.Eastside is top notch shop I wouldn't heszitate to use them again.The car is a 2001 SS 6spd
02-21-2005, 06:56 PM
#2
Staging Lane
Join Date: Jan 2005
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97383LT4
I had Eastside do the install great shop,I went with there 5.3 heads pp,Stayed with my TR224 112lsa.I did not get a flow sheet but Ken said they flow around 300 cfm.My other suppoting mods are kooks headers with catted y,gmmg exhausht,lid and smotth bellow the rear is a moser 12 bolt with 410's out back.The car made 432 rwhp at 6700rpm's torque 400 at 4500 rpm's.I just love driving this car so much more now it runs real strong.Eastside is top notch shop I wouldn't heszitate to use them again.The car is a 2001 SS 6spd
224 cam at our camp usually peaks at 6300rpm, just curious.
02-21-2005, 07:14 PM
#3
9 Second Club
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: Long Island,NY
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
As far as peak hp from 6300 and 6700 the hp levels out but it seems to shoot up slightly at 6700 but your right it does make peak power at 6300 rpm's as far as the torque it was spinning on the dyno so didn't get a excat reading on that but from the dyno sheet it shows I was making 400 pounds of torque at 4500 rpm but then skike up up to 475 which is not right.