ls1 problems times inside, input needed
05-07-2005, 02:48 PM
#1
11 Second Club
Thread Starter
iTrader: (118)
Join Date: Jan 2004
Location: RGV texas
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
ls1 problems times inside, input needed car: 1998 camaro z28
mods: ported tb, cutout, tsp lid
times: 13.48@104 2.0 60 ft
problem: just intalled 3400 stall
times: 13.3@100 1.8 60 ft
times: 13.4@100 1.7 60 ft
with my old times and a stall i was hoping for a 12.9-13.0, especially with those 60 fts.
seems as my car dies around the 1/8?
8.5@80 in the 1/8 mile.
my friend who installed my stall, told me i had "slack" in my drivetrain. could that be the problem? if so...what or how can i fix this problem?
mods: ported tb, cutout, tsp lid
times: 13.48@104 2.0 60 ft
problem: just intalled 3400 stall
times: 13.3@100 1.8 60 ft
times: 13.4@100 1.7 60 ft
with my old times and a stall i was hoping for a 12.9-13.0, especially with those 60 fts.
seems as my car dies around the 1/8?
8.5@80 in the 1/8 mile.
my friend who installed my stall, told me i had "slack" in my drivetrain. could that be the problem? if so...what or how can i fix this problem?
05-08-2005, 07:30 AM
#2
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
i don't know exactly what he means by slack in the drivetrain.you need to scan it while making a pass to make sure everything is all right.if it feels like it is dying after the 1/8th i would suspect your getting some KR and the computer is pulling some timing.it's normal to lose a little mph with a stall but i would think you would have picked up at least 3/10ths.