smask04C5

iTrader: (1)

Ordered a set of AFR 205's milled .024 to 62cc. Plan on installing on my C5. Will use cometic .040 head gaskets, all pistons are .007 out. Would like to use existing camshaft, Crane/vhp 216/224 w/.551 lift on crane 1.8 accelerated rockers bring lift to .590. My questions are: Is my scr going to be too high? Will a good tune overcome most issues? Should I consider only going to 63 cc? Thanks

PREDATOR-Z

According to my calculator, you should be around 10.9:1 SCR
No problem.