head swap help.
04-09-2006, 04:35 AM
#1
Teching In
Thread Starter
Join Date: Jan 2006
Location: Midland Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
head swap help. I just swapped my stock heads out for the livernois stage 1 ls2/ls6 heads.
Went buy LS1howto's journal (read the rocker arm torque spec's wrong torqued to 22 1/2 then 24ft lbs)
Anyway started it herd the rocker's clicking pretty hard but could hardly tell there was a cam In the car Idle sounded stock?
Plus my interior lights were kinda flickering with the cam surge's consistantly..
I have the Pcv mod dont know If I hooked that up wrong..
But It ran like crap Any Help would be major step forward.
Slowly brought up the Rev's the first time it shut of at 3100 rpms started it back up and was better but still ran like crap
Went buy LS1howto's journal (read the rocker arm torque spec's wrong torqued to 22 1/2 then 24ft lbs)
Anyway started it herd the rocker's clicking pretty hard but could hardly tell there was a cam In the car Idle sounded stock?
Plus my interior lights were kinda flickering with the cam surge's consistantly..
I have the Pcv mod dont know If I hooked that up wrong..
But It ran like crap Any Help would be major step forward.
Slowly brought up the Rev's the first time it shut of at 3100 rpms started it back up and was better but still ran like crap
