finally picked a cam ???i think??
01-29-2008, 07:42 PM
#1
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
finally picked a cam ???i think?? ok first off this is going in a truck
a 03 chevy avalanche with 37s on 20inch rims
5.3 stock short block
chromoly pushrods s
comp lifter
milled .055 243s with a 57cc combustion chamber--ported and polished
pacesetter long tube headers
off road y-pipe
hooker aroechamber
single 3in exhaust
cold air intake
uderdrive pulley
so i finally have a ballpark of what i want anything close to this cam without exceeding the .545 lift????????
224/224 .545/.545 idk what lsa yet
im gonna put the 1.75comps ratios rockers i have on it then switch up to 1.85s that i bought then stagger them intake 1.75 exhaust 1.85 then visa versa
a 03 chevy avalanche with 37s on 20inch rims
5.3 stock short block
chromoly pushrods s
comp lifter
milled .055 243s with a 57cc combustion chamber--ported and polished
pacesetter long tube headers
off road y-pipe
hooker aroechamber
single 3in exhaust
cold air intake
uderdrive pulley
so i finally have a ballpark of what i want anything close to this cam without exceeding the .545 lift????????
224/224 .545/.545 idk what lsa yet
im gonna put the 1.75comps ratios rockers i have on it then switch up to 1.85s that i bought then stagger them intake 1.75 exhaust 1.85 then visa versa
