kratos2250

I have a 2002 camaro ss. Mods are LT's, ORY, magnaflow catback, SLP lid, Ported stock TB, Touquer V2 camshaft 232/234 595/598 112, and a Yank ss3600 stall, I dynoed at 376rwhp and 353rwtq. I gained about 40rwhp from the cam swap But I really want 400rwhp without putting a set of heads on (high mileage motor 101,000). What do you guys think? FAST 90/90 and pulley?

bsf

iTrader: (7)

For parts only, is not a Fast 90/90 setup plus pulley going to be within $200-$300 of a set of budget heads?

therobman

iTrader: (39)

pulley and cut out helps, i say you would be very close to 390 with a pulley and cutout if not more ur mods are almost identical to mine except i have a pulley and cutout im hoping for around 390 after the tune

chieftransam

Do you guys love that Torquer 2? I'm wanting one but I'm just not so sure about it since I have the 59 cc heads. I've got over 400 rwhp with the 224 cam and I want to move up.

barracuda_440

Im thinking about a torquer v3, but i have a 98 so i would need a ls6 intake, and im a m6 so my dyno numbers will be alittle higher than yalls.

chieftransam

I would have ptv issues with the torquer 3 thats y I'm looking at the v.2. (I'm a m6 as well..not that it matters).

kratos2250

The power doesn't come in till bout' 3000rpm with the V2.