Which heads for LQ9 408?
#1
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Dec 2001
Location: SE Florida
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Which heads for LQ9 408?
Not totally sure I'm going with this, but think if I do something it will be a LQ9 408. With money in mind, I'd like to use as much of the stuff off my 347 as I can. I have a ported Fast 90 / 90 as well as a T-rex cam, TTS LT headers and duals. Having done a little research on here in the past few hours, I see decent heads for ths block can be picked up for a reasonable price. I can't afford AFRs or anything like that right now.
The heads I have right now are Patriot Performance 035 casting S2 (2.02/1.57 valves / 59cc). Are these decent heads for this block & combo or is there a different set in the 1200- 1300 range that would give me substantial gains? I have no plans on going FI any time in the near future and nitrous use would probably be limited to a 150-200 shot.
The heads I have right now are Patriot Performance 035 casting S2 (2.02/1.57 valves / 59cc). Are these decent heads for this block & combo or is there a different set in the 1200- 1300 range that would give me substantial gains? I have no plans on going FI any time in the near future and nitrous use would probably be limited to a 150-200 shot.
#3
11 Second Club
iTrader: (13)
PRC Stg 3 LS6 Heads I'm very sure these heads will get you 500rwhp but not $1200 though.
Why dont you sell the Trex???
A freind of mine made 450rwhp with 408ci Trex/PRC stg 2.5 LS6 heads/ with A4 stock TB and stock Intake stock MAF / 1 3/4 Headers.
I'm very sure With M6 and ported FAST Setup and stg 3 heads better cam 500rwhp wont be a problem.
Why dont you sell the Trex???
A freind of mine made 450rwhp with 408ci Trex/PRC stg 2.5 LS6 heads/ with A4 stock TB and stock Intake stock MAF / 1 3/4 Headers.
I'm very sure With M6 and ported FAST Setup and stg 3 heads better cam 500rwhp wont be a problem.