Vengeance cam with PRC heads?
06-17-2008, 10:48 PM
#1
On The Tree
Thread Starter
Join Date: Sep 2007
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Vengeance cam with PRC heads? So I really like the price of the PRC heads and the performance from them. I am also impressed with the vengeance cams and the VRX5 in particular. I am looking at swapping to the PRC 5.3l stg 2.5 heads with the VRX5 cam (236/238 .601/.605) I know it's pretty similar to other cams and I would think it would work well with these heads, just like any other cam.
I only ask if you think this will work because I know Vengeance loves to match their cams with TrickFlow heads, which I don't want to spend that kind of money for.
Should this setup be good and produce good power?
I only ask if you think this will work because I know Vengeance loves to match their cams with TrickFlow heads, which I don't want to spend that kind of money for.
Should this setup be good and produce good power?
06-18-2008, 12:12 PM
#2
On The Tree
Thread Starter
Join Date: Sep 2007
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Should this probably make some good power? I know cams are universal and should make the same power as any other cam it's size would on the same heads...but I just wanted to make sure before I went ahead and bought one. Still waiting to here back from Texas-Speed...
