second_2_none

iTrader: (6)

i just recently put in an ms4 cam, vig 4k stall, and all the supporting mods(oil pump, valve train..ect). i have full bolt ons w/stock 3:23 gears. with just full bolt ons i made 330whp-339tq. i know horse power is mainly used for tuning and what not and that my converter takes a lot as it was unlocked. but do my new numbers seem to be low to you guys? i was expecting to be around 385whp-360tq. also the dyno is not a mustang dyno.

TXZ28LS1

iTrader: (5)

those numbers are low! but remember its an auto, so its not really gonna show huge numbers. the 4k stall is gonna eat up alot of power. plus do u have a LS6 manifold? if your still running the ls1 manifold its def holding back some power.

bjamick

iTrader: (31)

Unlocked numbers were that? Then actually that is good. If you would have made another pull and locked the converter, you will see up to 20-50rwhp gain.. So your over 400rwhp with a locked converter. So cam only, I dont think your doing bad at all.

second_2_none

iTrader: (6)

oh ok, that puts a lot to ease. thanks guys! oh and i do have an ls6 intake.

L3THAL_Z28

iTrader: (5)

torque numbers seem a little low...locking the converter will net you at least another 20 ponies tho.

bjamick

iTrader: (31)

My car went from 266-306 while doing nothing but locking the converter ..

00MaroonZ28

iTrader: (3)

Numbers vary. I went from 402 to 435 by locking the converter. Usually average 30 hp.