Livernois stage 2 or 3 heads? or PRC 2.5 LS6, or??
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I might have a problem with my heads(stage 3 CNC LS6;dont know brand because I bought it this way and the owner dont know too).
The problem is that I pushed water at the same place(driver's side) 2 times in 10000miles with ARP stud and Fel-Pro gasket. So the heads might be damaged.
I'm really interested in Livernois heads stage 3 because I dont want to lose any power right now. That would kill me.
Or get the same heads casting if I can find where it comes from. Or Patriot, PRC and TEA might be a good try. I kinda like Dart too...
Or sell everything and wait for the 408/L92
My cam is a TRacing cam and the spec has been grinded on the cam. But it looks like a 23x+ cam. Peak hp is at 6200-6300 on LS6 intake. I'm at 405rwhp right now and 535rwhp on juice.
The problem is that I pushed water at the same place(driver's side) 2 times in 10000miles with ARP stud and Fel-Pro gasket. So the heads might be damaged.
I'm really interested in Livernois heads stage 3 because I dont want to lose any power right now. That would kill me.
Or get the same heads casting if I can find where it comes from. Or Patriot, PRC and TEA might be a good try. I kinda like Dart too...
Or sell everything and wait for the 408/L92
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
My cam is a TRacing cam and the spec has been grinded on the cam. But it looks like a 23x+ cam. Peak hp is at 6200-6300 on LS6 intake. I'm at 405rwhp right now and 535rwhp on juice.