Cam Install
#2
TECH Junkie
Join Date: Nov 2001
Location: Los Angeles
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Install
With only the information you've given we can't say, but if you are using stock unmodified heads then 7.400 without a doubt. 7.350 with that cam and stock heads could be really bad.
#3
Launching!
Join Date: Apr 2003
Location: Cincinnati, Ohio
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Install
You wouldn't modify your pushrod length for the sake of any cam. You only modify your pushrod length if you alter your valvetrain geometry. By that, I mean mill the heads, or go to a different rocker setup that's incompatible with the stock setup, etc.
#4
Teching In
Thread Starter
Join Date: Aug 2002
Location: Darien, Illinois
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Install
Lift: .581/.581 Dur@.050: 224/224 LSA: 112 114
OVATE WIRE SPRING SET, USE WITH STOCK RETAINERS
That's what I have so far. The brand is Comp Cams.
I think I will go with the CHROME MOLY PUSHRODS 7.400' (STOCK LENGTH)
I am getting this stuff from Speed Inc.
OVATE WIRE SPRING SET, USE WITH STOCK RETAINERS
That's what I have so far. The brand is Comp Cams.
I think I will go with the CHROME MOLY PUSHRODS 7.400' (STOCK LENGTH)
I am getting this stuff from Speed Inc.