VIDEO: Tick Performance's NEW Polluter Camshaft at Idle
#1
VIDEO: Tick Performance's NEW Polluter Camshaft at Idle
As you all know, all of us here at Tick Performance proudly released our new Polluter Camshaft yesterday and posted some results in the Dyno forum. Many of you asked for soundclips - your wish is my command.
For more information on this new cam, check out: https://ls1tech.com/forums/dynamometer-results-comparisons/969227-proudly-introducing-tick-performance-s-flagship-lsx-camshaft-polluter.html
For more information on this new cam, check out: https://ls1tech.com/forums/dynamometer-results-comparisons/969227-proudly-introducing-tick-performance-s-flagship-lsx-camshaft-polluter.html
Trending Topics
#16
LS1TECH Sponsor
iTrader: (5)
We've had good results with the tsp 5.3 heads in the past with other cams, but have yet to test it with our Polluter cam.
#18
Staging Lane
Join Date: Apr 2008
Location: panama city beach
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
It should work with either head. If you don't want to notch the pistons for clearance you'll need to leave the heads un-milled and go with a gm gasket. PTV clearance should still be checked however.
We've had good results with the tsp 5.3 heads in the past with other cams, but have yet to test it with our Polluter cam.
We've had good results with the tsp 5.3 heads in the past with other cams, but have yet to test it with our Polluter cam.