VIDEO: Tick Performance's NEW Polluter Camshaft at Idle
#22
#29
Thread Starter
LS1TECH Sponsor
iTrader: (20)
Joined: Oct 2007
Posts: 1,751
Likes: 2
From: Mount Airy, NC
I'm sure there are plenty of them from around the country - we've sold a ton of these things. Here in house, we're putting together a nice cam only setup in our shop car. It went 11.0x last year on motor, we'll go deep 10s this year with it. Cam only, 6spd.
Updates coming soon!
Updates coming soon!
#30
#31
what exactly is your description of *cam Only* i see a $hit ton of people on here that use it all the time..just want to know what your version is...not being rude ..just wanna make sure i am on the right page
and what exhaust was run on that SOM TA?
and what exhaust was run on that SOM TA?
Last edited by Black FormulaLs1; 05-31-2009 at 11:21 PM.
#32
I would like to see some more customer dynos/times on this cam, preferably cam only with bolt ons.
I did a little screwing around and compared my dyno at CMS to the one used in the ad up top...
My current setup is PRC 2.5 5.3's milled to 59cc and 224/228 581 588 114+2. I would like to see some independent tests of this cam with similar mods to the ones used in the first post in order to confirm their accuracy.
If this is anywhere near accurate I might go to this cam and get some 243's or port my 241's.
I did a little screwing around and compared my dyno at CMS to the one used in the ad up top...
My current setup is PRC 2.5 5.3's milled to 59cc and 224/228 581 588 114+2. I would like to see some independent tests of this cam with similar mods to the ones used in the first post in order to confirm their accuracy.
If this is anywhere near accurate I might go to this cam and get some 243's or port my 241's.
#37
Joey. I just got mine installed a couple days ago. The video is the car untuned at a cold start. I'll be getting it tuned in a couple weeks and repost a better vid. She runs fat when cold. Thanks agian.
http://www.youtube.com/watch?v=urJQUOM37Ug
http://www.youtube.com/watch?v=urJQUOM37Ug