Hdeziii3

Hi everybody sorry for the silly question, just haven't found an answer. I bought a 2005 LS2 Corvette with an fbody camaro crank pulley with out any front accessories. My question is:

1. Am I correct in thinking that the accessory drive brackets, cam pulley, alternator bracket, power steering, need to come from an fbody vehicle? From what I've read the pulley in a corvette crank pulley sits closer to the engine than the fbody camaro.

2. Will I need to buy a fbody water pump to line up with the fbody crank pulley, or will an LS2 water pump work just fine?

Thanks.

Frank

G Atsma

If the engine is in a Vette you need to swap out the crank damper/pulley, and use Vette accessories to fit properly.

Hdeziii3

Engine is not in a vette. It is going into a squarebody c10.

Z28SteveA4

iTrader: (16)

If you have an f body dampener I believe the only accessory that will work are f body. You can use a s2 water pump with f body accessories though since I believe most people switch to that water pump with a fast 102 intake

G Atsma

ALWAYS match the spacing of accessories with the crank damper/pulley. If you are keeping the F-body crank pulley, then water pump, alternator, and P/S pump must be the same spacing.