LS3/L92 valve stem dia.
04-19-2009, 07:49 PM
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
LS3/L92 valve stem dia. Does anyone know what the stock In and Ex valve stem diameter is?
The specs I've found are conflicting:
Car Craft L92 head article states 8mm (0.315-in)
The online Manley catalog lists them as:
0.3133-in (7.958 mm) In.
0.3136-in (7.965 mm) Ex.
Are these discrepancies within acceptable tolenances?
Car I safely install a 5/16-in (7.9375 mm) stem valve in my L92 heads?
The specs I've found are conflicting:
Car Craft L92 head article states 8mm (0.315-in)
The online Manley catalog lists them as:
0.3133-in (7.958 mm) In.
0.3136-in (7.965 mm) Ex.
Are these discrepancies within acceptable tolenances?
Car I safely install a 5/16-in (7.9375 mm) stem valve in my L92 heads?
04-20-2009, 08:42 AM
#2
LS1Tech Sponsor
Join Date: Feb 2006
Location: Rockfield Kentucky
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know what the stock In and Ex valve stem diameter is?
The specs I've found are conflicting:
Car Craft L92 head article states 8mm (0.315-in)
The online Manley catalog lists them as:
0.3133-in (7.958 mm) In.
0.3136-in (7.965 mm) Ex.
Are these discrepancies within acceptable tolenances?
Car I safely install a 5/16-in (7.9375 mm) stem valve in my L92 heads?
The specs I've found are conflicting:
Car Craft L92 head article states 8mm (0.315-in)
The online Manley catalog lists them as:
0.3133-in (7.958 mm) In.
0.3136-in (7.965 mm) Ex.
Are these discrepancies within acceptable tolenances?
Car I safely install a 5/16-in (7.9375 mm) stem valve in my L92 heads?
I just used the 5/16" seals from Comp.
Robin
