New Lloyd Elliott cam for my TBSS
06-04-2009, 01:49 AM
#1
Teching In
Thread Starter
Join Date: May 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
New Lloyd Elliott cam for my TBSS So here it is. Just waiting on springs, locks, and retainers now. Comments are greatly appreciated.:cheers1:
Here's the part you have all been waiting for......
Here's the part you have all been waiting for......
06-05-2009, 11:40 PM
#4
TECH Fanatic
I ran it by my favorite cam guy and he didn't agree. He just said he would do it considerably differently.
The good thing is the LS engines are relatively forgiving.
That's why I asked for results.
Jon
The good thing is the LS engines are relatively forgiving.
That's why I asked for results.
Jon
06-07-2009, 02:45 PM
#6
Teching In
Thread Starter
Join Date: May 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Well, now it'll be C6 fan upgrade also. There was no point in putting the stock clutch fan in it. I would install the fan now but you have to do some computer crap for it to work correctly. So it's just eaiser to do the cam and fan at the same time.
I have had had great success with Elliotts parts before. I gave him a call and told him what I had done and what I have in the works. That's what he came up with.
I have had had great success with Elliotts parts before. I gave him a call and told him what I had done and what I have in the works. That's what he came up with.
