about to buy a 6.0L now what
#1
TECH Enthusiast
Thread Starter
iTrader: (17)
Join Date: May 2004
Location: GA
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
about to buy a 6.0L now what
i am about to buy a 6.0 barer block. Now I know that i will need to get everything the engine needs but there are a lot of little things that comes on assembled blocks. I'm going to attempt to write a list of the things I know i will need. Feel free to add in/suggest better parts. I am going to start a very long process towards a 408 stroked d1 procharged set-up. I'm aiming to get as close to 800 rwhp as possible. But as for now i need to get the necessary parts to get the motor completed and on the road. it will be a while before i get the cash to buy the procharger set-up. please keep the goal in mind when viewing this list.
This is all i can muster up so far:
Top End
Patriot stage 3 lq9 heads
Fast 92mm intake/throttle body combo
what maf is best for this setup?
What fuel rail?
dual intank walbro pumps and 65lb injectors.
stock ram air airbox (camaro ss) or SLP cold air intake
smooth bellow
Internals
TSP rotating assembly-
Wiseco -15cc dish pistons 4.03"
Total seal steel ring 4.03"
Clevite "H chamfered" main & rod bearings
Eagle H beam connecting rods w/ ARP 2000 rod bolts
Compstar 4" crankshaft
EPP blower cam
patriot gold valvesprings
LS2 timing chain
LS2 oil pump
LS2 oil pan
What rockers?
What size pushrods?
ls7 lifters
I'm sure there is a good bit missing. When adding, please suggest size/brand to parts suggested.
This is all i can muster up so far:
Top End
Patriot stage 3 lq9 heads
Fast 92mm intake/throttle body combo
what maf is best for this setup?
What fuel rail?
dual intank walbro pumps and 65lb injectors.
stock ram air airbox (camaro ss) or SLP cold air intake
smooth bellow
Internals
TSP rotating assembly-
Wiseco -15cc dish pistons 4.03"
Total seal steel ring 4.03"
Clevite "H chamfered" main & rod bearings
Eagle H beam connecting rods w/ ARP 2000 rod bolts
Compstar 4" crankshaft
EPP blower cam
patriot gold valvesprings
LS2 timing chain
LS2 oil pump
LS2 oil pan
What rockers?
What size pushrods?
ls7 lifters
I'm sure there is a good bit missing. When adding, please suggest size/brand to parts suggested.
#2
TECH Enthusiast
Thread Starter
iTrader: (17)
Join Date: May 2004
Location: GA
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
anybody? like pulleys- things like that i am confused on. Will they come with shortblocks or would they have to be purchased seperately anyway? i knwo there's got to be people out there that can chime in.
#3
10 Second Club
iTrader: (15)
Join Date: Nov 2001
Location: St. Michael, MN.
Posts: 4,519
Likes: 0
Received 0 Likes
on
0 Posts
I am going to start a very long process towards a 408 stroked d1 procharged set-up. I'm aiming to get as close to 800 rwhp as possible. But as for now i need to get the necessary parts to get the motor completed and on the road.
https://ls1tech.com/forums/forced-in...induction.html
it will be a while before i get the cash to buy the procharger set-up. please keep the goal in mind when viewing this list.