highest hp for an stock cubes ls3
#1
TECH Apprentice
Thread Starter
Join Date: Mar 2004
Location: North richland hills texas
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
highest hp for an stock cubes ls3
what is the highest hp rating for a stock cube ls3...no more displacement...just adding bolt ons only....give me a hp range...remember no more displacement just stock cubed ls3....
Last edited by layz; 05-02-2010 at 06:49 PM.
#2
On The Tree
Join Date: Dec 2007
Location: akron ohio
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
A ls3 corvette on corvette forum did 522 rwhp with a cam heads and cai. wasnt a big cam either something like 235 240. several people including rpm motorsports use a 230/234 cam and consistantly get 500rwhp and 460trq.
#4
A bolt-on only LS3, about 430-450 hp. Cam only (w/ bolt-ons) about 450-500 hp. And a H/C/I setup, about 480-520'ish....w/ FI, 550-600+.
I'm running a cam-only LS3 w/ a ECS NOVI system. Without the blower, the setup puts out about 460 hp. The blower pumps it up to 570 rwhp on a safe tune w/out meth. If I added meth, 650-700 rwhp would be the norm. But it's already hard enough in keeping the rear tires under the car as is. Only reason I'd add meth is to lower IAT's during the summer.
Good luck. Hope this helped.
I'm running a cam-only LS3 w/ a ECS NOVI system. Without the blower, the setup puts out about 460 hp. The blower pumps it up to 570 rwhp on a safe tune w/out meth. If I added meth, 650-700 rwhp would be the norm. But it's already hard enough in keeping the rear tires under the car as is. Only reason I'd add meth is to lower IAT's during the summer.
Good luck. Hope this helped.
#6
TECH Enthusiast
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Yea, LG has a dyno video of a bolt-on ls3 with the g6x3 doing 500.12rwhp I believe, with some better heads although the stockers are pretty good anyways, you could see about another 25rwhp.
#7
TECH Junkie
iTrader: (9)
A bolt-on only LS3, about 430-450 hp. Cam only (w/ bolt-ons) about 450-500 hp. And a H/C/I setup, about 480-520'ish....w/ FI, 550-600+.