ls3/l92 on 6.0
01-23-2017, 08:31 PM
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: San Juan, TX
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
ls3/l92 on 6.0 Anyone used a GPI SS3 cam on a 6.0 with ls3 top end? Thinking of ordering that cam soon. Also would I also see a noticeable difference if i mill the heads about .020 and use .040 gaskets to not not milling head and using stock gaskets
01-25-2017, 08:42 AM
#2
Not sure about the cam. I have LS3 heads on my car. The heads are milled to 64.8cc's and running a .040" head gaskets. We had to flycut the pistons with my cam. Cam Motion 230/238 .626 lift 113+ 3.