What should be done to an LS3 to support 650+whp?
#1
What should be done to an LS3 to support 650+whp?
Have an LS3 with a V3 Si blower + BTR Stage 4 SC cam. Have titanium retainers and platinum springs.
Am I pushing my luck on rods? Timing chain? Head studs? Anything I should be thinking of doing?
Am I pushing my luck on rods? Timing chain? Head studs? Anything I should be thinking of doing?
#3
#5
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 16 Likes
on
16 Posts
Engine Missfire Cures
Hi, what breaks an engine is non-spark, weak spark OR the Spark Instant being at the wrong time.
The RPM of the engine can be too great for component life.
My recommendations:
I would fit my timing set, Avon Gear, Steel Gears with HD chain. (HP requirement from Dual Springs)
I would fit my Chinese head studs @ $100.00
I would fit a 2010 Camaro OP with pressure shim increase.
I would fit my IGN-1A coil kit.
These items, if fitted, will cure the cause of many engine problems.
Lance
The RPM of the engine can be too great for component life.
My recommendations:
I would fit my timing set, Avon Gear, Steel Gears with HD chain. (HP requirement from Dual Springs)
I would fit my Chinese head studs @ $100.00
I would fit a 2010 Camaro OP with pressure shim increase.
I would fit my IGN-1A coil kit.
These items, if fitted, will cure the cause of many engine problems.
Lance