Where to find the cheapest electric cutouts
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Where to find the cheapest electric cutouts
I'm looking at getting electric cutouts on my 99 WS-6. Where can i find some cheap ones (cheap in price, not quality) that are under $150?
Also, what have y'all heard about the electrics? Good, bad, ok?
Also, what have y'all heard about the electrics? Good, bad, ok?
#3
12 Second Club
iTrader: (3)
the valve itsself is $125+, you arent going to be able to get both from the same place for less than $180. You can try to get the cheapest cutout from summit and put an electric valve. mine was actually less than $125 inluding shipping. But i still paid QTP $45 for a cutout.
#6
TECH Fanatic
iTrader: (6)
Join Date: Jun 2003
Location: DFW
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
I use mine all the time too... especially when driving by the cops or when I get close to the house. I try not to **** off the neighbors too bad. I honestly don't remember where I got mine though, it's been a few years.
Trending Topics
#8
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Vrbas
I'm looking at getting electric cutouts on my 99 WS-6. Where can i find some cheap ones (cheap in price, not quality) that are under $150?
Also, what have y'all heard about the electrics? Good, bad, ok?
Also, what have y'all heard about the electrics? Good, bad, ok?
#9
Teching In
iTrader: (3)
Join Date: Jul 2003
Location: TN
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I have had my Mccord pawer plate for about 3-31/2 years now. I open and close it all the time. The only problem I have had with it is the set screw the holds the plate to the bar came loose. A little locktite and screwed it back down and have had no problems since.