please post your before/after cam dyno's!!!!
#1
10 Second Club
Thread Starter
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
please post your before/after cam dyno's!!!!
I want to see some before and after cam dyno's with the same bolt on's. Only changing the cam to see if you picked up any power.
Heads, bolt on's and cubes doesn't matter, as long as the only thing changed between the dyno's was the cam.
this should help settle an arguement of 'big' vs 'small' cams that some people are having.
thanks!!!
Heads, bolt on's and cubes doesn't matter, as long as the only thing changed between the dyno's was the cam.
this should help settle an arguement of 'big' vs 'small' cams that some people are having.
thanks!!!
#2
Launching!
Join Date: Jun 2002
Location: Windsor,Ct 06095
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: please post your before/after cam dyno's!!!!
Car: 99 Trans Am M6
Hooker L/Ts w orp, Borla Catback,stock intake
stock tbody,stock tuning,stock maf.
Cam 1: Gm Hotcam 358hp and 353 lb/ft tq
Cam 2: TR224/112lsa 361hp and 358lb/ft tq
Cam 3: Comp XE230/110+4 373hp and 367lb/ft tq
I know there is more power to be had with each with tuning but this was a direct comparison.
Hooker L/Ts w orp, Borla Catback,stock intake
stock tbody,stock tuning,stock maf.
Cam 1: Gm Hotcam 358hp and 353 lb/ft tq
Cam 2: TR224/112lsa 361hp and 358lb/ft tq
Cam 3: Comp XE230/110+4 373hp and 367lb/ft tq
I know there is more power to be had with each with tuning but this was a direct comparison.
#4
8 Second Club
iTrader: (16)
Re: please post your before/after cam dyno's!!!!
john I went from stock with headers to where I am now...I dont think I made 380.9 hp on the stock cam....and I'm pretty sure I didnt make 364.2 tq on the stock cam...I could see somebody without headers making more tq from 1000-2000 but above that headers will make more.....I have around 300 tq at 1200 rpm.......need I say more....
#5
TECH Senior Member
iTrader: (2)
Re: please post your before/after cam dyno's!!!!
hey john, the big vs. small cam discussion has been made by me in a thread on this page but i will give my .02
364 rwhp with hotcam and all boltons
385 rwhp with 230/230 cam and same boltons.
big cams make more power!
364 rwhp with hotcam and all boltons
385 rwhp with 230/230 cam and same boltons.
big cams make more power!