blackonblack02_Z

iTrader: (6)

Looking for a LS1 block and crank. I would prefer a crank that has not been turned, the block would be preferred as a virgin. If its still buildable though it'll work. Please let me know what you have.

neals98

iTrader: (9)

would you consider a short block that is togather..LS6 Block,stock crank,egale rods,dimiond pistons...Nothing worng with it and very fast short block may also consider selling long block it has been in the 9's thanks.

BKHAWK1

I am saling a LS1 long block if your interested. FMS 347 w/ pro-mod rods, Diamond pistons and a set of 5.3 stage II ported heads. Been 9.80's.

blackonblack02_Z

iTrader: (6)

Thanks for the replies guys, but I am only looking for...

Block
Crank
Mains

I have no need for something thats already built. I have a special project with most parts already bought. Only thing I do not have is pistons, and i am waiting to get the block so I know what oversize I will need for them.

blackonblack02_Z

iTrader: (6)

Bump.

artlsx10

iTrader: (15)

I have a new 5.3L block. Would that help?

89Formulaws6

iTrader: (52)

i have a stock crank from a ls2 that has 3k miles the reluctor wheel has been changed as well im deciding on going to a 402 so i dont need it!

let me know

SSPerformance

iTrader: (76)

i have one pm me if intristed

yamii

iTrader: (3)

This is what I have let me know if your interested.
http://www.ls1lt1.com/forum/showthread.php?p=168983

dudeman

iTrader: (43)

i have a 99 block with mains and bolts and a crank with low miles. both are standard. pm if interested