Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Creaton of a sleeper!!!

Thread Tools
 
Search this Thread
 
Old 11-04-2008, 03:14 PM
  #1  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default Creaton of a sleeper!!!

Hey everyone, Im sort of new to the lsx world(buddies have lots of cars 2fastmotorsports, danny at OCGMP, aaron and chris) and have an idea of building my doner car as sleeper as possible for the street races and track. I want to go in-expensive as possible. So I have my doner car 1994 camaro with no engine and ordering a th400 (don't want the trans to go on a big street race) Im most likely going with a bone bone stock engine down to the intake and exhaust! I want this thing to look stock!!! I want to put a 125 wet shot that everyone can see and a 75 dry that is going to be hidden within the stock intake... Yes that is a 200 shot!!! I would like everyones input on everything, i got to take out some cobras around here that have large mouths!!! Thanks for the imput guys it is much needed!!!
Old 11-04-2008, 03:25 PM
  #2  
11 Second Club
iTrader: (3)
 
SMOKNSS's Avatar
 
Join Date: Dec 2006
Location: Alabama
Posts: 879
Likes: 0
Received 0 Likes on 0 Posts

Default

What kind of "bone stock" engine...... back to an LT, swapping for LS?
Old 11-04-2008, 03:32 PM
  #3  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

its going to be an ls engine whatever i can get my hands on real cheap. No lt1's for me!!!
Old 11-04-2008, 04:08 PM
  #4  
TECH Enthusiast
 
99bowtieZ's Avatar
 
Join Date: Oct 2007
Location: NC
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
Default

Haha good luck, keep us updated on those cobra kills...
Old 11-04-2008, 04:27 PM
  #5  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

yah for sure i will post some vids also when its done and the races too...
Old 11-04-2008, 05:31 PM
  #6  
OWN3D BY MY PROF!
iTrader: (176)
 
Beaflag VonRathburg's Avatar
 
Join Date: Feb 2006
Location: Jax Beach, Florida
Posts: 9,149
Likes: 0
Received 3 Likes on 3 Posts

Default

I've thought of doing this before, but it's pretty much pointless. You'll suprise maybe two people and then they know your car is fast. Not to mention you're posting what you are doing on the internet and all the people you know.
Old 11-04-2008, 06:06 PM
  #7  
11 Second Club
iTrader: (16)
 
SuperSlow02's Avatar
 
Join Date: Feb 2006
Location: Cape Girardeau, MO
Posts: 1,865
Likes: 0
Received 0 Likes on 0 Posts
Default

/\ truth.... Best way to do it is cam,secret heads, and lie about the shot...easiest way to pull off fooling people. Keep um guessing
Old 11-04-2008, 06:14 PM
  #8  
JDP
TECH Fanatic
iTrader: (21)
 
JDP's Avatar
 
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes on 0 Posts
Default

i would just run a big dry shot, you never really run across a car spraying a big dry shot, most people see a dry shot and only assume like 75-100.
Old 11-04-2008, 06:22 PM
  #9  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

that is very true!!! JDP big dry shot would be a way to go??? And yah people will know how fast my car is becuase word travels fast.
Old 11-04-2008, 06:30 PM
  #10  
JDP
TECH Fanatic
iTrader: (21)
 
JDP's Avatar
 
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes on 0 Posts
Default

thats what i would do, i wouldnt try hiding it cause people will eventually find out about it. just make it look simple. people get intimidated by a lot of **** going on under the hood.

i have a 500+rwhp 402, but my car runs stock LS2 fuel rails with a stock L76 intake, a lot of people dont know the casting numbers on the head, so it looks like a stock ls1 under the hood if you dont know what your looking at. people just think i have a cam.

when people dont pop their hoods it means they are hiding something, i like popping my hood because there isnt anything to look at. just try to make everything look as stock as possible
Old 11-04-2008, 07:46 PM
  #11  
TECH Junkie
iTrader: (13)
 
black01_WS6's Avatar
 
Join Date: Sep 2004
Location: Fort Myers, FL.
Posts: 3,857
Likes: 0
Received 0 Likes on 0 Posts

Default

you should build the stock motor and get some ported and polished stock heads and a small cam. After that get the money maker kit from nitrous outlet- hides everything and you can spray a 200 shot w/o too many people knowing what the hell just hit them.
Old 11-04-2008, 09:09 PM
  #12  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

nice. The dry shot is a great idea. Bc nobody thinks of running a big dry kit.
Old 11-04-2008, 10:03 PM
  #13  
TECH Fanatic
iTrader: (10)
 
built408's Avatar
 
Join Date: May 2007
Location: Fort Worth Texas
Posts: 1,784
Likes: 0
Received 1 Like on 1 Post

Default

so a bone stock ls motor with a 200 shot? Sorry but thats not really a sleeper to me, I would go back to the drawing board if you want to spank cobras....
Old 11-04-2008, 11:00 PM
  #14  
On The Tree
Thread Starter
iTrader: (1)
 
2003cobraH/C's Avatar
 
Join Date: Jun 2008
Location: Orange County
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

these are street cobras... A few with eatons, a few whith whipples at best 10.4 at 135. I have a whipple cobra with head and cam that im selling. I know what i need to run to beat them. 10.3's on the street lol. Light car good trans plus a 200 shot should get me there?
Old 11-05-2008, 09:00 AM
  #15  
12 Second Club
iTrader: (30)
 
streetassasin's Avatar
 
Join Date: May 2006
Location: Orange, TX
Posts: 2,548
Likes: 0
Received 1 Like on 1 Post

Default

1st off if you put a LS1 in a 94 everyone will know it not stock, If it was me,Id do a forged 418" LS3 with a sleeper can CNC'ed L92's and a nitro daves money maker kit.
Old 11-05-2008, 09:07 AM
  #16  
Launching!
 
allmotor's Avatar
 
Join Date: Jan 2008
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 2003cobraH/C
Hey everyone, Im sort of new to the lsx world(buddies have lots of cars 2fastmotorsports, danny at OCGMP, aaron and chris) and have an idea of building my doner car as sleeper as possible for the street races and track. I want to go in-expensive as possible. So I have my doner car 1994 camaro with no engine and ordering a th400 (don't want the trans to go on a big street race) Im most likely going with a bone bone stock engine down to the intake and exhaust! I want this thing to look stock!!! I want to put a 125 wet shot that everyone can see and a 75 dry that is going to be hidden within the stock intake... Yes that is a 200 shot!!! I would like everyones input on everything, i got to take out some cobras around here that have large mouths!!! Thanks for the imput guys it is much needed!!!
You want to make a sleeper with a stock motor? Hope you can afford a C5R
Old 11-05-2008, 09:18 AM
  #17  
12 Second Club
iTrader: (33)
 
Hennytime's Avatar
 
Join Date: Jan 2005
Location: winter springs, fl
Posts: 2,584
Likes: 0
Received 0 Likes on 0 Posts

Default

do a 408 and say its stock displacement with one hidden kit and one wet kit, itll keep people guessing for a long time if you play right

sort of how my turbo kit will have a 60mm and a stock bottom end....or will it
Old 11-05-2008, 09:28 AM
  #18  
Staging Lane
 
Kelly.'s Avatar
 
Join Date: Mar 2006
Location: Colorado Springs, CO (6200ft altitude =/ )
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

why not a 408 with a completely hidden kit,.

not offense, but a 200 shot stock motor isnt gonna consistently win street races (around here anyway)
Old 11-05-2008, 09:37 AM
  #19  
Launching!
 
allmotor's Avatar
 
Join Date: Jan 2008
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Hennytime
do a 408 and say its stock displacement with one hidden kit and one wet kit, itll keep people guessing for a long time if you play right

sort of how my turbo kit will have a 60mm and a stock bottom end....or will it
Yeah, a 60mm wastegate
Old 11-05-2008, 11:04 AM
  #20  
12 Second Club
iTrader: (30)
 
streetassasin's Avatar
 
Join Date: May 2006
Location: Orange, TX
Posts: 2,548
Likes: 0
Received 1 Like on 1 Post

Default

or even better would be to have 2 n2o bottles, one on the driveshaft tunnel and one in the spare tire compartment. Have the one on the tunnel a dummy bottle and the real bottle in the back. Tell some one you are gonna run them on motor and pull the dummy bottle but keep the real bottle hooked up and on and spray the house down. It might seems confusing but I cant find a better way to word it



All times are GMT -5. The time now is 07:15 PM.