This is serious! Rear end?????????????
#1
This is serious! Rear end?????????????
Ok I wasnt planning on it but it looks like i might be selling a couple of my sleds(snowmobiles) tomorrow, and I want to buy a complete new rear end to handle my power plus any future upgrade! Im going with 4.10s/4.11s so thats not what I want to know. 9in? S60? How much $$$$???????
Street/strip car dont want gear noise!!
Let me Hear your thoughts?
BTW eventually this car will be FAST! Should run 11 spring maybe 10s by fall and faster when I can afford it
Thanks
AC
Street/strip car dont want gear noise!!
Let me Hear your thoughts?
BTW eventually this car will be FAST! Should run 11 spring maybe 10s by fall and faster when I can afford it
Thanks
AC
#5
Banned
iTrader: (12)
It's random you ask this question cause I was just read about this question on another forum. Most guys with the M6 were going with the 9in where the A4 guys went with the 12 bolt. Either way bro, you will be fine. If you have any plans for a future build then I say go 9
I just saw the s60 part so never mind my story
#6
Thank you guys! I just needed something!!LOL! Seems I sold my sleds and I need answers NOW! LOL! sorry but this is alot to think about.
Car is going in for total top end rebuild monday and This would top it off and possibly get a run in b4 the season is over here.
Car is going in for total top end rebuild monday and This would top it off and possibly get a run in b4 the season is over here.
Trending Topics
#11
This car will go to the track 20 times a year! It will always have DRs or slicks at the track. The car is getting the Heads and cam and all the suporrting mods installed next week. If possible I would like to get it all done b4 the tracks close at the end of november.
#12
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
I like the 9", i wish i would have went with a 4.30 gear though, especially with a 26.4" tire, it'll hold alot of abuse with a mild set-up (bolt-ons), if you do get one, it'll run around 2300.00, then you'll need a new driveshaft & aftermarket TA like a BMR, i would run either a full spool or true trac.
#13
Launching!
iTrader: (7)
Join Date: Jan 2004
Location: In The Fast Lane
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
I had (went back to stock) a Moser 9" with U.S. Gear 3.89's (best gear imo), detroit tru trac, 31 spline axles, strange case, ford racing pinion support and all timken bearings. I put the whole rear together for about $1900 with all new parts and had a local guy set up the center section, had absolutly no gear noise, it was great. The rear is now in my buddy's car and he loves it, the 3.89's put him at about 1850rpms at 70 and when he had his 12 bolt with 4.10's it was at about 2000. He put down about 370 at the wheels and it takes it all. Hope that helps a little.
#14
Banned
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
S60
really though it fits better the your std. 9" and is more efficient while have larger parts which in turn is said to be stronger.
I will have you an installed price tomorrow.
edit : actually it will be later today
really though it fits better the your std. 9" and is more efficient while have larger parts which in turn is said to be stronger.
I will have you an installed price tomorrow.
edit : actually it will be later today
#17
A. Keep 10-bolt and get car running correctly. Replace as noted below when it breaks. Hide face when it blows up and delays racing for 30 min
B. Strange/Moser 12-bolt.
C. Strange S-60.
D. Strange/Moser 9"
E. Sell car, cut losses.
What other options were you looking for?
B. Strange/Moser 12-bolt.
C. Strange S-60.
D. Strange/Moser 9"
E. Sell car, cut losses.
What other options were you looking for?
#18
Banned
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
Strange has pushed us to not sell 12 bolts for cars that will see good track duty with hard launches.. S60 is their suggestion for anything that will see good drag strip duty.
10 bolt and DS can be sold now is perfect working order to help offset costs
my thoughts
10 bolt and DS can be sold now is perfect working order to help offset costs
my thoughts
#19
Im not worried about the money of putting it in! The only thing good about the 10bolt is its weight and efficency(sp). Other than that its a tow from the track to my house wich is atleast 50miles. Not to mention the embaressment of breaking down and holding up the lanes.
I have the money now and might as well do it right the first time.!!
I have the money now and might as well do it right the first time.!!
#20
TECH Resident
Join Date: Sep 2007
Location: Phoenix,AZ
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
sorry to hijack but i got a quick question, so a couple guys said that the ten bolt will hold up with some good power on street tires. Its only gonna kill it with sticky tires grabbin at the track? im gonna be doin heads cam and all that soon and i dunno if a rear is in my plans right now and i wont be goin to the track just a fun daily driveable m6 car.