Is this used car dealer charging me too much for parts?
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Is this used car dealer charging me too much for parts?
PLEASE DONT JUST VIEW THIS THREAD AND LEAVE IF YOU HAVE A KNOWLEDGEABLE OPINION! JUST TELL ME WHAT YOU THINK. HAPPY HOLIDAYS!
I know a guy who has a Moroso cold air intake in great condition, Vortec elbow with not even a scratch, and Hypertech power programmer for 94-95 motors. I just met him and talked to him a little while. He sold his 95 trans am and now has a 96' Formula(firehawk clone). He now has no need for the CAI and other stuff. He is a used car dealer so I am not sure how trustworthy he is , these are coming off of his personal car not a car on his lot.
He said he would give me the CAI and elbow for $140 and that would include him driving an hour and bringing it to my door. He said he would sell me all three (HPP, CAI, elbow) for $275....Are both of these good deals or bad deals? I see CAIS and elbows sell for $60 + shipping and elbows sell for $50 +shipping on here sometimes...I have almost all the other boltons and I need to get intake parts. I know Hypertech is usually frowned upon on here and I highly doubt I would buy it because I plan on getting a dyno tune soon and could do all those things + more. Please let me know you thoughts and opinions. -Thanks, Bruce
I know a guy who has a Moroso cold air intake in great condition, Vortec elbow with not even a scratch, and Hypertech power programmer for 94-95 motors. I just met him and talked to him a little while. He sold his 95 trans am and now has a 96' Formula(firehawk clone). He now has no need for the CAI and other stuff. He is a used car dealer so I am not sure how trustworthy he is , these are coming off of his personal car not a car on his lot.
He said he would give me the CAI and elbow for $140 and that would include him driving an hour and bringing it to my door. He said he would sell me all three (HPP, CAI, elbow) for $275....Are both of these good deals or bad deals? I see CAIS and elbows sell for $60 + shipping and elbows sell for $50 +shipping on here sometimes...I have almost all the other boltons and I need to get intake parts. I know Hypertech is usually frowned upon on here and I highly doubt I would buy it because I plan on getting a dyno tune soon and could do all those things + more. Please let me know you thoughts and opinions. -Thanks, Bruce
#3
Launching!
iTrader: (3)
Join Date: Sep 2008
Location: back to Jax :(
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
He said he would sell me all three (HPP, CAI, elbow) for $275....Are both of these good deals or bad deals? I see CAIS and elbows sell for $60 + shipping and elbows sell for $50 +shipping on here sometimes...I have almost all the other boltons and I need to get intake parts. I know Hypertech is usually frowned upon on here and I highly doubt I would buy it because I plan on getting a dyno tune soon and could do all those things + more. Please let me know you thoughts and opinions. -Thanks, Bruce
#4
Just compare the prices he's charging to the prices new.
As long as they are in fair condition and fully functional why not.
The HPP is probably a waste of time. I havnt heard much good about them.
I picked up a K&N Cold air intake w/ filter and a 1LE elbow for under 100 bucks shipped. Sometimes you find great deals. It doesnt sound like he's overcharging though.
As long as they are in fair condition and fully functional why not.
The HPP is probably a waste of time. I havnt heard much good about them.
I picked up a K&N Cold air intake w/ filter and a 1LE elbow for under 100 bucks shipped. Sometimes you find great deals. It doesnt sound like he's overcharging though.
Trending Topics
#8
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Alrighty, I will do it than. I am going to offer $130 and see if he bites. He was trying to tell me how the hypertech would make these crazy noticeable gains in performance and then I mentioned you guys on ls1tech and said I heard it was crap...He still believes it is great. Thanks for the advice, I am always looking to save a buck. thanks guys
#9
Sounds like you have a good deal going. It's not dirt cheap, so I'd make sure it came with the couplers and clamps and stuff. Also, maybe I'm just too nice... but i'd just pay the $140... mainly cause when i'm selling I hate being nickled and dimed. Now if there's some small peices it's missing... then pull the price down.
If he keeps pushing the Hypertech, just tell him you'll need a tune for other stuff that the hypertech can't do, and then there will be no use for it.
For one, he's trying to sell it, so of course it will be good
For two, you just can't sway some people's opinions... probably has the placebo effect from spending so much money on it and you'll never change his mind.
If he keeps pushing the Hypertech, just tell him you'll need a tune for other stuff that the hypertech can't do, and then there will be no use for it.
For one, he's trying to sell it, so of course it will be good
For two, you just can't sway some people's opinions... probably has the placebo effect from spending so much money on it and you'll never change his mind.
#10
TECH Senior Member
iTrader: (3)
Join Date: Oct 2006
Location: Decatur, TN (N-W of Athens)
Posts: 7,564
Likes: 0
Received 4 Likes
on
4 Posts
If it comes with a resuable filter, I think that's a good deal. Unless you're lucky, you can't usually get just the CAI for under $120, minus shipping. So factor in that you get an elbow too, I think it's good.
The ONLY thing those tuners are good for is changing line pressure (A4), gear ratios for speedo and fan turn on temps.
The ONLY thing those tuners are good for is changing line pressure (A4), gear ratios for speedo and fan turn on temps.
#11
TECH Junkie
iTrader: (31)
Poor hypercrap,they sure made a buttload of money on those things..
they are only good for a few things:
tire and or gear swaps-------how times will this occur
harder shifts---------------oooooh wow
160° stat------------------fan control
the rest is well not worth the price especially compared to a mail order tune..
check ebay for the bellow i have seen a few for cheap in the past..
they are only good for a few things:
tire and or gear swaps-------how times will this occur
harder shifts---------------oooooh wow
160° stat------------------fan control
the rest is well not worth the price especially compared to a mail order tune..
check ebay for the bellow i have seen a few for cheap in the past..
#13
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm...from what you guys are saying I am getting a better deal than I first thought...I will probably just pay the $140 and say goodbye to those $10 that could have bought me two Cabbage Patch Kids....I guess beggars can't be choosers.
#15
12 Second Club
Join Date: Jun 2005
Location: Warner Robins Ga
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Just received a used Moroso CAI kit and 1LE elbow for $60 shipped from a guy on fbody.com. That includes shipping and a K&N filter cleaning and oil kit for the dirty filter. He also threw in TB plate cover. Look around you can find a good deal. I'm not saying your not getting a good deal since it is a savings from buying new, but u might find a better deal elsewhere.
#16
TECH Senior Member
iTrader: (3)
Join Date: Oct 2006
Location: Decatur, TN (N-W of Athens)
Posts: 7,564
Likes: 0
Received 4 Likes
on
4 Posts
Yes, you always can find better deals with digging, but that can take some time. That and I'd rather have the Vortec elbow over the 1LE, I like the air flow 'diverter' (yea yea, not a word I know) in that elbow
Wish I had the spare change to pick up that one Counted mentioned. Necessity over desire though!
Wish I had the spare change to pick up that one Counted mentioned. Necessity over desire though!
#18
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
I am sure I could find it cheaper one day, but I rather not wait(I have been looking for a decent one for a while). Plus I like the polished vortec elbow and for some reason I have my heart set on Moroso and not K&N or SLP etc,