C5 zo6 question
01-20-2009, 09:00 AM
#1
Registered User
Thread Starter
Join Date: Sep 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
C5 zo6 question Hello every body
if i want reach 500rwhp in the 2004 zo6 ls6
how can i reachit whish cam and which heads
another question if i got bolton and pully and dyno tuned in the vette ls6 how much hp can i get
if i want reach 500rwhp in the 2004 zo6 ls6
how can i reachit whish cam and which heads
another question if i got bolton and pully and dyno tuned in the vette ls6 how much hp can i get
01-20-2009, 09:45 AM
#2
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
500 rwhp is going to take a decent sized cam and one of the better sets of heads out there. I would suggest a cam in the high 230's to low 240's and either a top set of ported heads or trickflows.
As for the bolt ons you can get the car to around 380 rwhp with most of the basic bolt ons and headers. For much past that you would have to spend money on a Fast and electric water pump. You can easily hit the 470-480 rwhp range without spending too much money on stuff, but the 500 rwhp will take every bolt on and trick in the book.
As for the bolt ons you can get the car to around 380 rwhp with most of the basic bolt ons and headers. For much past that you would have to spend money on a Fast and electric water pump. You can easily hit the 470-480 rwhp range without spending too much money on stuff, but the 500 rwhp will take every bolt on and trick in the book.
01-20-2009, 11:51 AM
#3
https://ls1tech.com/forums/generatio...heads-cam.html
Last edited by SOMbitch; 01-20-2009 at 11:57 AM.
01-20-2009, 10:35 PM
#4
http://www.youtube.com/watch?v=GlU4iZxH4lQ