Need sponsor input for heads and cam intake
#1
Staging Lane
Thread Starter
Join Date: Apr 2008
Location: New Jersey
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Need sponsor input for heads and cam intake
I have a 2000 trans am a4 with 165,xxx miles with lt headers and a catted y,
slp lid and its puttin out about 318hp @ 5250rpm and 343 torque @ 4400rpm
with a tune. So wat i think wat im lookin for is a setup for a pretty streetable
ride as this is my daily driver id rather have my power in the lower rpms. Im
wondering if its worth putting heads and cam or just buying a new engine
and starting fresh and building up with an ls6. Because as it is i already have
a knock when its cold and plenty of miles and i dont think it makes any sense
to do anything twice. thanks for any help
slp lid and its puttin out about 318hp @ 5250rpm and 343 torque @ 4400rpm
with a tune. So wat i think wat im lookin for is a setup for a pretty streetable
ride as this is my daily driver id rather have my power in the lower rpms. Im
wondering if its worth putting heads and cam or just buying a new engine
and starting fresh and building up with an ls6. Because as it is i already have
a knock when its cold and plenty of miles and i dont think it makes any sense
to do anything twice. thanks for any help