Need help selecting stall speed 2.73 6l80e
03-04-2009, 10:09 PM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Need help selecting stall speed 2.73 6l80e You guys are about the most knowledeable I've seen. I had some tranny issues with my A6 (2.73) 6l80E and am thinking about restalling it while it's down. I currently have a Vig 3200 and am pulling low 1.7 60s without stalling the converter off the line... With the steep first gear, what would be the ideal converter speed for my setup..
My car is a bolt-on only car 2008 A6 Z51... my best is a 7.27@98.7 (1.71 60') in the 1/8... My car weighs 3360 with me in it... 10.97 first gear ratio... (slightly shorter tire than stock 295/35/18s)..
Is it even worth my time restalling it? I'm in the 11.2-11.3 range, but would love a 10 second slip.
My car is a bolt-on only car 2008 A6 Z51... my best is a 7.27@98.7 (1.71 60') in the 1/8... My car weighs 3360 with me in it... 10.97 first gear ratio... (slightly shorter tire than stock 295/35/18s)..
Is it even worth my time restalling it? I'm in the 11.2-11.3 range, but would love a 10 second slip.
03-05-2009, 08:22 AM
#2
im not gonna be mush help with this but I'll give it a go anyhow.
When I did my T/A I got in touch with performabuilt and they custom built me a 9.5" 3000 race stall and it was everything I wanted. give them a call and they can match it to suit your needs.
When I did my T/A I got in touch with performabuilt and they custom built me a 9.5" 3000 race stall and it was everything I wanted. give them a call and they can match it to suit your needs.
