what cam are the guys with stock heads running?
#1
what cam are the guys with stock heads running?
I plan on buying a cam soon. I have a 98TA, A4, PY3400, 3:23, 150 shot combo. I'm wondering what cam people with the same combos are running? And what kind of ET's are you getting out of the cars? How high are you having to spin the motor? Thanks
#3
Re: what cam are the guys with stock heads running?
I run a old classic cam, comp 216/220>525/532 on a 114. JUST TURNED 12.18 AND 12.19 AT 110 not to happy but thats what it ran.
#4
TECH Enthusiast
Join Date: Jan 2002
Location: las vegas, nev
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam are the guys with stock heads running?
i used to run a 230/228, 591/588 on a 111 lsa with my stock heads. i was turning 11.60's @ 115 with da's in the 3000' area with a 3150 raceweight with a best of 11.58 @ 116 in 1540' da. i ran 4.56 gears and shifted at 7000 rpms. on a 150 shot i managed a 10.81 @ 124 in 5000' da shifting into overdrive at the 800 foot mark
Trending Topics
#11
Launching!
Join Date: Dec 2001
Location: Collin County
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam are the guys with stock heads running?
I run the MMT M2 cam. They have a MA2 or M2A now with less lope. I have run a best of 11.5 in the 1/4 old stall 1700ft.
And ran a 7.18 in the 1/8th (1/4=11.2X) last Fri. with 750ft air and a yank stall.
And ran a 7.18 in the 1/8th (1/4=11.2X) last Fri. with 750ft air and a yank stall.
#12
11 Second Club
iTrader: (27)
Join Date: May 2002
Location: East Palestine, OH - USA
Posts: 2,397
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam are the guys with stock heads running?
TR230/224 with Yank TT2800/3.0STR converter, MAC headers and ORY with cutout, Edit tuning, SLP airlid. Runs 12.6's @113MPH on stock 10 bolt with 2.73 gears.
#13
Re: what cam are the guys with stock heads running?
Thanks guys, my motor runs great. But would like to make it a little better. I just dont want to swap heads just yet. I'll wait till I have real problems before I do that. Thanks again to all of you.