Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

What to do? 4l60e problems

Thread Tools
 
Search this Thread
 
Old 03-14-2009, 12:45 PM
  #1  
Teching In
Thread Starter
iTrader: (4)
 
ss25414's Avatar
 
Join Date: Nov 2008
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default What to do? 4l60e problems

Well to start off I have a 98 ss camaro. Ever since i bought it the a4 trans had trouble with the 1-2 shift at WOT but 2-3 was ok. I installed h/c/i and took it to get it tuned. Picked it up last week and the 1-2 was better but the 2-3 was was not there at all. It would not shift into drive under WOT just bounced off the limmiter. Normal driving was ok. Took it back and had it had them make some adjusments picked it up again last night and drove it home. 1-2 shift is perfect but the 2-3 bounced off the limmeter and them jumped back and forth before it went into 3. I let off and tried again and it hit perfectly. I was happy. I got a little closer to home and gased it again same thing it seemed to jump back and forth 2-3 2-3 2-3 and then slipped into 3 real soft. It did that every time after untill i got home. Parked the car for about a hour and took a friend for a ride the first time i got on the gas it hit the rev limeter a few times then went in. The next time I did it shifted pefect. Im lost on this trans. Is it the trans or the tune? I have a complete m6 set up for the car But the trans is built with a vig 3800 stall. Fluid is nice and clean. Give up on the auto and put the m6 in or ??? Im lost any help would be great thanks

Last edited by ss25414; 03-14-2009 at 12:55 PM.
Old 03-14-2009, 12:50 PM
  #2  
LS1Tech Sponsor
iTrader: (25)
 
performabuilt's Avatar
 
Join Date: Aug 2006
Location: BLOOMSBURG PA
Posts: 10,859
Received 79 Likes on 56 Posts
LS1Tech 10 Year
Default

Are you sure you dont mean issue with the 2-3 and not the 3-4?
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Old 03-14-2009, 12:56 PM
  #3  
Teching In
Thread Starter
iTrader: (4)
 
ss25414's Avatar
 
Join Date: Nov 2008
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

im sorry your right. Thanks
Old 03-14-2009, 12:56 PM
  #4  
11 Second Club
iTrader: (3)
 
Greg Pippin's Avatar
 
Join Date: Mar 2008
Location: Golsdboro, NC
Posts: 227
Likes: 0
Received 0 Likes on 0 Posts
Default

make sure the fluid is not too full and not too low...?
I had a bunch of problems with my 4L60E in my 2000 T/A. I gave up and im currently putting a M6 in it.
Old 03-14-2009, 01:01 PM
  #5  
Teching In
Thread Starter
iTrader: (4)
 
ss25414's Avatar
 
Join Date: Nov 2008
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

fluid is good i checked and double checked.
Old 03-14-2009, 01:28 PM
  #6  
LS1Tech Sponsor
iTrader: (25)
 
performabuilt's Avatar
 
Join Date: Aug 2006
Location: BLOOMSBURG PA
Posts: 10,859
Received 79 Likes on 56 Posts
LS1Tech 10 Year
Default

If the 2-3 was ok before the tune and nosw the 1-2 is good but the 2-3 is not, I would suspect tuning.
And I would not go to and M6 just yet why make your car slower. Solve the real problem whatever it is and go fast lol.
Seems so many people now if it dont come easy dont do it lol. I remember when I was a kid barley knowing what I was doing but spending days and weeks solving things with my car as I moded it, The more it would not do what I wanted the more determined I became that IT WAS GOING TO! LOL
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Old 03-14-2009, 01:43 PM
  #7  
Teching In
Thread Starter
iTrader: (4)
 
ss25414's Avatar
 
Join Date: Nov 2008
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

well I wanted to keep the auto for a while for the track. I have no problems working on it myself but i cant tune it myself. I think this could be a tunnig problem. I wish the guy was closer but he is about 1.5 hours away and ive been down there three times. The guy is a good tunner car runs great and pulls hard if i can get past the trans problems. my friend has a performabuilt trans and his runs great tunned by the same guy. Im just lost
Old 03-14-2009, 02:06 PM
  #8  
LS1Tech Sponsor
iTrader: (25)
 
performabuilt's Avatar
 
Join Date: Aug 2006
Location: BLOOMSBURG PA
Posts: 10,859
Received 79 Likes on 56 Posts
LS1Tech 10 Year
Default

How many miles are on the trans you have? Tuning a new trans and a high milage one can be quiet different really, The older trans has higher clearances and slower shift times and may require some playing with it live to get what you want. New built units are generally easier because they are predictable within reason.
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Old 03-14-2009, 02:54 PM
  #9  
Teching In
Thread Starter
iTrader: (4)
 
ss25414's Avatar
 
Join Date: Nov 2008
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

im not sure. it was in the car when i bought it but i was told only a few thousand but dont mean much really
Old 03-14-2009, 05:15 PM
  #10  
LS1Tech Sponsor
iTrader: (25)
 
performabuilt's Avatar
 
Join Date: Aug 2006
Location: BLOOMSBURG PA
Posts: 10,859
Received 79 Likes on 56 Posts
LS1Tech 10 Year
Default

Well I would still have to say if the 2-3 was good before the tune and the 1-2 was the issue and now they have swapped it would still be a tune issue IMO but its really hard to say for sure either way.
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Old 03-14-2009, 05:30 PM
  #11  
10 Second Club
iTrader: (3)
 
tording99Z28's Avatar
 
Join Date: Nov 2007
Location: Hampton, VA
Posts: 1,033
Likes: 0
Received 2 Likes on 2 Posts

Default

Once again a reason why HPtuners or EFILive is almost a must have for any enthusiast that likes to mod cars. See if you can pick up a used one and then you can make these tweaks yourself and you don't have to worry about driving to the tuner everytime there is an issue.

Sounds like a tuning issue to me as well but since you don't know anything about the the trans its tough to say for sure.
Old 03-14-2009, 10:17 PM
  #12  
Banned
 
turbot78's Avatar
 
Join Date: Mar 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

i have your solution ,an fully build 4l60e ship
Old 03-15-2009, 05:16 PM
  #13  
TECH Fanatic
iTrader: (1)
 
bigdsz's Avatar
 
Join Date: Jun 2003
Location: Mount Dora, Fla
Posts: 1,876
Likes: 0
Received 1 Like on 1 Post
Default

Man don't go to a M6, if you race much it will kill your times. I'm putting out 524/501 and doing 12.1 @ 117mph with a 408. My shifting sucks, thats why I'm going to a th400 so I can get to high 10's low 11's.




All times are GMT -5. The time now is 11:10 PM.