Lifted a head
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Oct 2004
Location: Allentown PA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Lifted a head
Well after alot of runs with this setup 116 octane in the standalone 67n 42f a/f was right around 11.0 I think the fuel solenoid failed at the top of 3rd at the track and when I got back I knew the plugs were knocked out and I saw some dexcool that sprayed. Limped the car home 40 miles it was misfiring I did change the plugs b4 I left for home. Car is a stock bottom end just cam headers 4l80e converter and 9'' ive gone 130mph with this setup oh well time for some ls6 heads and new gaskets and some studs.
#3
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Oct 2004
Location: Allentown PA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Im going to try and get the heads off today and take a look anything specific I could look for on the top of the piston? Checked the fuel noid this morning it seems to be working fine but ive had nitrous solenoids in the past work and then not work then work again. Whatever happened is really strange as ive been running this setup no issues for awhile.
Last edited by RamAir02TA77; 03-22-2009 at 09:46 AM.
#4
OWN3D BY MY PROF!
iTrader: (176)
Im going to try and get the heads off today and take a look anything specific I could look for on the top of the piston? Checked the fuel noid this morning it seems to be working fine but ive had nitrous solenoids in the past work and then not work then work again. Whatever happened is really strange as ive been running this setup no issues for awhile.