outtagas

im about to send my intake off to get the money maker install but my question is where do the people that have it mount the solenoids at?the car will have 2 stages would ya'll use this kit for the 1st or 2nd stage? the other kit is a single fogger.i wanna have one on a 100 and the other on a 125

Xtremespeed

iTrader: (25)

Doubt you'll get any answers to that question. No one wants people to know where to look for the solenoids. Sorry I can't help. I would talk to Chris or Dave at Nitrous outlet. They can hook you up.

firefighter813x

iTrader: (6)

Just don't open your hood! lol GL!

Dragframe

iTrader: (14)

**** i would jet get vette engine covers... hide the noids under it. Easy enough and they look good.

studderin

iTrader: (28)

what solenoids?

stangeater01

iTrader: (125)

use it as a second kit small on the single nozel in first and big on money maker there are no limits where you can hide the noids especially if you have longer lines. under your pass seat would be a place no one would look lol but really there are hundereds of places to hide, pop hood look for a dark spot and put them there think sneeky some place that would be too much of a pain in the *** to get too

outtagas

Thanks. One more question. What would be the best way to tap in for fuel on stock rails for this kit?

gi8e7oi825

iTrader: (32)

What if you went to the rear of the car? There's a T-block all the way in the back where the return line and fuel filter are. Just add a fitting somewhere in that area and run the fuel line from there up to the front. Then you won't have to touch your rails.

Nitro Dave's Nitrous Outlet

iTrader: (25)

We will tell you everything you need to know when we are shiping your intake back to you.. Its all shhhhh

outtagas

Oh ok. Thanks a lot! Wasn't sure. Just didn't wanna spend that money and run into a bunch of problems

ATVracr

iTrader: (5)

LOL and if you tell anyone they will kill you.


I have seen one and it was pretty cool, if someone doesnt know where to look they wont find it by mistake.

Z-RATED94

iTrader: (6)

That might be true. One day my buddy was telling his dad how it worked and the next day he and the manifold were gone. No one has seen him since then. So be very carefull what you say.

TARZAN

iTrader: (12)

Use it as a 3rd kit....that way when you unhook one (or even both) obvious kits, you've still got something to use....they'll never know what hit em

-Will

outtagas

That has crossed my mind lol thought about puttin an obvisous one for them to find like in the air filter or somethin

Noyzee

iTrader: (37)

sorry, im closing this thread. we have had issues with big mouths befor talking about this kit and i dont want it to happen again. you got your info, now we can move on

thanks