mj114679

Ok my alternator cut into my A/C line.... i need to figure out how to take the line off.... what tools where the hose goes ect ect.... this is a picture of the of the two hoses my hose is the one on top.http://shbox.com/1/refrigerant_sensor.jpg So again the question is what tools do i need and how do i go about taking this thing off!!! BTW this has to be done by tonight all the help with be great!!!! and please hurry guys!!!!!

ss.slp.ls1

iTrader: (36)

Sorry no one got back to you. Those hoses bolt to the AC box in the firewall, I believe one line goes to the AC compressor and one goes to the AC condenser. You just have to track them down and undo them with a wrench.

Why are you in a rush btw? You'll just be without AC until you replace the hoses and charge the system, no biggie.

djjab57

iTrader: (17)

Maybe he had a HOT date and needed the A/C to keep himself cool

CamaroRacing12

iTrader: (5)

hahaha

mj114679

well i found out its the line that goes down to the back of the compressor.... but theres just one more bolt i got to do that goes in the back of the compressor but its such a tight place and its such a tight bolt we cant get it off.... and i needed to know asap cause one of my buddies is gunna give me his hose off his junk car.... and that was suppose to be done today and i was suppose to have the hose off lastnight... but we couldnt get the blot out of the back of the compressor.. any ideas on how to get it off guys???

JB_97ws6TA

iTrader: (6)

take the belt off and remove the mounting bolts for the compressor to get a better angle at it

mj114679

Thanks Will do.. anybody got anything else???

ss.slp.ls1

iTrader: (36)

I think on my buddy's car, we pulled the motor mount pins and jacked up the bottom of the motor, this allowed more room to access the back of the comprssor from the bottom. As for my car...AC has beem long gone.