Scat 383 kit ?
#1
Scat 383 kit ?
Hey everyone i was wonderin if i could get some help. What 383 kit should i go with, but with a reasonable price. Scat seemed to have the best price i could find, are they any good? Does anybody know any pros and cons of these kits and what kind of mix and match could i do if any? Thank u for your help.
I have a 2000 ws6,with a set of fully ported and polished 243'3
Comp cam 230/236 .600 lift 114 lsa
ls6 intake
ls6 ported oil pump
ls2 timing chain
hooker headers with slp full exaust, these are all other mods when i find a roatating assembley
I have a 2000 ws6,with a set of fully ported and polished 243'3
Comp cam 230/236 .600 lift 114 lsa
ls6 intake
ls6 ported oil pump
ls2 timing chain
hooker headers with slp full exaust, these are all other mods when i find a roatating assembley
#2
LS1Tech Premium Sponsor
iTrader: (4)
Dont rule out the Eagle, or Callies products. We stock both brands rotating assemblies & my bet is if you give us the opportunity we can get you in either one for a VERY VERY competitive price. Personally I like the Callies parts, shoot me a pm or give us a call & we can get you some pricing!!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#3
12 Second Club
iTrader: (6)
I got a great deal on my 4" stroke SCAT crankshaft (my builder hooked me up big time) and also used SCAT's H-beam rods. The crank was excellent, in fact, my builder said the balance out of the box was almost perfect. The rods were great, too.
I definitely recommend SCAT for a good price. While Callies and Lunati are also great quality pieces, the price for the SCAT was too hard to ignore.
I definitely recommend SCAT for a good price. While Callies and Lunati are also great quality pieces, the price for the SCAT was too hard to ignore.
#5
i've heard that for a n/a street motor any forged assembly from a reputable brand is fine. if you start getting into FI or big nitrous (over about 200) than the brand (price) starts to make a difference. so if your building a driver street/strip car scat and eagle are fine, but for an big hp track monster Lunati and Callies and some other high priced pieces are the way to go.