New Best...10.89@122 1.46 60' NA Stock Cube LS1
11-08-2003, 01:53 AM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
New Best...10.89@122 1.46 60' NA Stock Cube LS1 The weather was clear all night tonite, although it was hot and humid as usual...The DA was around 1300.
Anyway, I was still able to get some new best ET's with my current setup. I got to say I was VERY please with my runs considering the weather.
The track was hooking good at the begining of the night then it kinda fell off, but then they cleaned it up and my 60's got better again.
5 out of 9 runs were 1.46 to 1.49 60 foots. I pulled the wheels about a foot on every run.
I have to give props to Kevin @ TCI, I had him put together a custom 8" converter for my car. This hits like the hammer of god off the line. I am in love!
Here were my top 5 runs, the other runs were like 11.13-11.30 when I tried to use the transbrake and spun off the line. I still pulled 121 MPH on those runs. Almost all of my 1/8 mile times were 6.9x's at almost 100 MPH.
1.468 60', 10.897 @ 122.53 MPH
1.481 60', 10.997 @ 121.44 MPH
1.491 60', 11.004 @ 121.47 MPH
1.469 60', 11.009 @ 121.16 MPH
1.485 60', 11.081 @ 120.96 MPH
I can also say I definately got my suspension dialed in. I was running stock LCA's and PHR for so long. What a difference. I went with the Madman Racing billet aluminum double adjustable LCA's and PHR and I corrected my TA pinion angle.
I had a smile on my face all the way home tonite, 10.89 ET with an all motor stock cube LS1
Lee
PS: I got some video of my runs, I will download it and post here soon.
Anyway, I was still able to get some new best ET's with my current setup. I got to say I was VERY please with my runs considering the weather.
The track was hooking good at the begining of the night then it kinda fell off, but then they cleaned it up and my 60's got better again.
5 out of 9 runs were 1.46 to 1.49 60 foots. I pulled the wheels about a foot on every run.
I have to give props to Kevin @ TCI, I had him put together a custom 8" converter for my car. This hits like the hammer of god off the line. I am in love!
Here were my top 5 runs, the other runs were like 11.13-11.30 when I tried to use the transbrake and spun off the line. I still pulled 121 MPH on those runs. Almost all of my 1/8 mile times were 6.9x's at almost 100 MPH.
1.468 60', 10.897 @ 122.53 MPH
1.481 60', 10.997 @ 121.44 MPH
1.491 60', 11.004 @ 121.47 MPH
1.469 60', 11.009 @ 121.16 MPH
1.485 60', 11.081 @ 120.96 MPH
I can also say I definately got my suspension dialed in. I was running stock LCA's and PHR for so long. What a difference. I went with the Madman Racing billet aluminum double adjustable LCA's and PHR and I corrected my TA pinion angle.
I had a smile on my face all the way home tonite, 10.89 ET with an all motor stock cube LS1
Lee
PS: I got some video of my runs, I will download it and post here soon.
11-08-2003, 08:18 AM
#6
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
GeorgeC: I had plans on going originally, but I had to cancel. I would have had to take a week off work, and things changed there. Atleast there is a big $$ bracket race today that I'm racing in here and after next weekend I am racing 4 weekends in a row. I'll be in Orlando, Moroso, Bradenton and then back to Orlando.
bspz28: Mine is blue too! Indigo Blue with tan leather interior, it came with the big black brush guard in the front and metal tube side steps and barn doors in the back. I love that truck!
bad95killer: I am looking at the video from last night right, AHHRG my pos DV camera can't focus on the time boards. As soon as I launch and get out to like the 330' everything goes blurry. The lighting at the track sucks. I am going edit it together and post it in a little bit. I am going be racing today again so I should be able to get some daylight the event kicks off at 4:30.
Lee
bspz28: Mine is blue too! Indigo Blue with tan leather interior, it came with the big black brush guard in the front and metal tube side steps and barn doors in the back. I love that truck!
bad95killer: I am looking at the video from last night right, AHHRG my pos DV camera can't focus on the time boards. As soon as I launch and get out to like the 330' everything goes blurry. The lighting at the track sucks. I am going edit it together and post it in a little bit. I am going be racing today again so I should be able to get some daylight the event kicks off at 4:30.
Lee
Trending Topics
11-09-2003, 10:30 AM
#8
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
I finally pieced together some video from Friday night. Sorry about the camera quality my DV camera is old..
Here's Fridays video...
Track Video 11-7-03 (23mb) -Right Click- Save Target As..
You'll see in the video I spun my tire on my rim. Also you can sort see my CAI mod, I relocated my K&N FIPK filter to the nose of the car. Its not getting blaster with cold air from the ground and through the inlet hole in the nose.
Also here's launch pic from Saturday night:
Lee
Here's Fridays video...
Track Video 11-7-03 (23mb) -Right Click- Save Target As..
You'll see in the video I spun my tire on my rim. Also you can sort see my CAI mod, I relocated my K&N FIPK filter to the nose of the car. Its not getting blaster with cold air from the ground and through the inlet hole in the nose.
Also here's launch pic from Saturday night:
Lee
(You know I copied you!)