Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Stock ls6 heads/cam vs Prc 2.5 5.3 heads stock ls1 cam

Thread Tools
 
Search this Thread
 
Old 06-08-2009, 03:41 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (5)
 
97ta383's Avatar
 
Join Date: Nov 2007
Posts: 515
Likes: 0
Received 0 Likes on 0 Posts
Default Stock ls6 heads/cam vs Prc 2.5 5.3 heads stock ls1 cam

So im tryin to decide which one to use im swaping the heads either way and i was wondering which would make more hp/tq and which would have more potiental later down the road when my drive train is up to par? And if i use the ls6 head and cam do i need to replace the oil pump and pushrods? And would i need to degree the cam? Im looking for around 360 to 370rwhp and around 350tq my car now 02 ws6 a4 full bolton 3000 stall made 332rwhp and 320rwtq Thanks!
Old 06-08-2009, 04:30 PM
  #2  
TECH Veteran
iTrader: (31)
 
bjamick's Avatar
 
Join Date: May 2006
Location: Birmingham AL.
Posts: 4,218
Received 3 Likes on 3 Posts

Default

Go ahead and get a nice set of heads now.

A car with a nice cam and crappy heads will run like a dog.

A car with a nice set of heads and a stock cam will run much better.
Old 06-08-2009, 09:19 PM
  #3  
TECH Senior Member
iTrader: (8)
 
SOMbitch's Avatar
 
Join Date: Sep 2007
Posts: 6,881
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by bjamick
Go ahead and get a nice set of heads now.

A car with a nice cam and crappy heads will run like a dog.

A car with a nice set of heads and a stock cam will run much better.
You still didn't answer the question........




All times are GMT -5. The time now is 01:39 AM.